Position a single-axle caravan with precise powered movement and manual cross-actuation roller engagement. The Powrtouch Evolution Single uses two drive motors, one for each caravan wheel, while a handheld remote controls forward, reverse and turning movement.
This is the manual-engagement single-axle model. The supplied wrench engages both rollers from one side through the Powrbar linkage. It is distinct from the Powrtouch automatic-engagement and twin-axle systems. Select Caravans is based in Auckland and supplies caravan accessories throughout New Zealand.
Who this caravan mover suits
- Single-axle caravan owners who are comfortable engaging and disengaging the rollers manually.
- Buyers who want remote-controlled positioning with a lower purchase price than the automatic-engagement model.
- Sites where controlled forward, reverse and turning movement helps with driveways, storage spaces, hitch alignment or campsite pitches.
Verified specifications
| Configuration | Single axle, two motors |
|---|---|
| Roller engagement | Manual cross actuation using the supplied wrench |
| Operating voltage | 12V DC |
| Recommended power source | 12V 100Ah caravan leisure battery |
| Average current | 20A |
| Maximum current | 80A |
| Movement speed | 28cm per second |
| Approximate system weight | 35kg |
| Rated caravan weight on a 25% gradient | 2000kg |
| Manufacturer guarantee | 5 years, subject to Powrtouch terms and registration requirements |
Manual engagement explained
Manual engagement refers only to moving the rollers onto and away from the tyres. The caravan itself is still manoeuvred by the remote handset. The cross-actuation linkage means the supplied wrench engages both sides from one engagement point.
- Apply the caravan handbrake before engaging or disengaging the rollers.
- Use the wrench carefully because the over-locking mechanism and return spring require force.
- Confirm both rollers are fully engaged before releasing the handbrake.
- When positioning is complete, apply the handbrake before retracting the rollers.
Check fitment before ordering
- Confirm that the caravan is single axle and that its actual loaded weight is within the applicable mover rating.
- Powrtouch's installation manual describes standard chassis depths of approximately 150mm or 200mm. Other chassis profiles can require special mounting plates.
- Check chassis condition, mounting space, suspension components, tyre position, tyre condition and ground clearance. Front-of-wheel installation is preferred where practical, although the manual allows rear installation with the specified wiring arrangement.
- Allow for the mover's approximately 35kg system weight when checking the caravan's payload.
- Confirm that the 12V leisure battery is suitable, healthy and correctly installed.
Manufacturer-listed components
The Powrtouch single-axle manual instructions list left and right mover units, electronics control box, engagement wrench, motor wires, fused battery wiring, clamp set, stop blocks, isolator switch and key, fixing pack, Powrbar sections, centre bar, side covers and handset. Check the delivered package against the current packing list before installation.
A leisure battery, charger, installer tools, sealant, special mounting plates and installation labour are not assumed to be included.
Installation and safe use
- Disconnect the caravan from its leisure battery and all other electrical supplies, including 240V mains, before installation work.
- Follow the current Powrtouch instructions and use competent professional help if chassis, electrical or mechanical fitment is uncertain.
- Test the handset direction with the rollers away from the tyres before the first movement check.
- The mover is not a parking brake or a jacking point. Apply the caravan handbrake whenever the caravan is stopped.
- Keep people clear, practise on level open ground, and fully disengage the rollers before towing.
- Switch the system off at the isolator and remove the key after use.
Frequently asked questions
What is the difference between manual and automatic engagement?
On this manual model, you use the supplied wrench to move the rollers onto and away from the tyres. The remote handset still controls caravan movement. The automatic model operates roller engagement from the handset.
Will it fit every single-axle caravan?
No. Axle count alone does not confirm fitment. Chassis depth and condition, brackets, suspension components, ground clearance, tyre position, payload and loaded caravan weight must all be checked.
What is the weight rating?
Powrtouch specifies 2000kg permissible overall caravan weight on a 25% gradient for this exact model. This is not an unlimited or universal rating.
Can a single-axle caravan turn on its axis?
The manufacturer states that this single-axle configuration can turn the caravan on its axis when the site, tyre grip and caravan setup allow.
Which battery is required?
The current Powrtouch product specification lists a 12V 100Ah caravan leisure battery. Battery condition, cabling and charger suitability also affect performance.
Can I order from Auckland or elsewhere in New Zealand?
Yes. Select Caravans is based in Auckland and supplies customers across New Zealand. Delivery timing and installation options depend on destination and current availability.
How does the guarantee work?
Powrtouch lists a five-year manufacturer guarantee. Eligibility, registration, installation and local support conditions can apply, so confirm the terms for your purchase before installation.