$13.50
saving
AUTOTERM Push Control L is a compact stainless push-button controller for current AUTOTERM Air and Flow heaters. This is the L version with the 12mm round connector and AUTOTERM assembly number AT13-0002-AF0. It suits space-conscious caravan, motorhome, campervan and marine installations where simple tactile heater control and a clear colour status display are useful.
Choose the correct Push Control
- This product: Push Control L, 12mm round-connector version, assembly AT13-0002-AF0.
- Different product: Push Control S, 6mm Molex-connector version, assembly AT13-0001-AF0.
- Check the connector, heater model and installation drawing before ordering or drilling the mounting surface.
Compatible AUTOTERM heaters
AUTOTERM lists the Push Control for current Air 2D, Air 4D and Air 9D air heaters, plus Flow 5D, Flow 5B and Flow 14D liquid heaters. Compatibility for older heater versions should be confirmed before purchase because available functions can vary.
How the Push Control works
AUTOTERM Air heaters
- Without an external temperature sensor, short presses step through five heater power settings.
- With a compatible external temperature sensor, the button provides 18°C, 21°C, 25°C and maximum-power selections.
AUTOTERM Flow heaters
- The button starts pre-heating for two hours or continues pre-heating until it is switched off manually.
The RGB LED shows operating state and level: blue for minimum, purple for low, green for medium, yellow for high and red for maximum. A flashing red LED indicates an error, while alternating red and blue indicates shutdown.
Duo control with another panel
The included Push Control Duo module has connections for the heater, Push Control button and an additional supported panel. To use the Push Control alongside an AUTOTERM Comfort Control or Comfort Boiler Control, the separate Push Module Wire AT4-0014-AF0 is required. RV Supplies lists this wire as RVZ8347. It is not listed as included with this product.
What is included?
- AUTOTERM Push Control L stainless RGB button with mounting nut
- Sealing ring
- Push Control Duo module
- 30cm heater-to-module connection cable
- 2m module-to-button connection cable
- User manual
The Comfort Control, Comfort Boiler Control, external temperature sensor and separate AT4-0014-AF0 panel connection wire are not listed as included.
Installation and specifications
- Version: Push Control L
- Connector: 12mm round-connector version
- Manufacturer assembly: AT13-0002-AF0
- Button material: stainless steel
- Button ingress protection: IP67
- Maximum Air-heater-to-module wiring length: 10m
- Maximum Flow-heater-to-module wiring length: 5m
- Maximum module-to-button wiring length: 10m
The button is IP67 rated, but the control module itself has no ingress protection and must be installed in a secure, dry location. Follow the current AUTOTERM heater and Push Control manuals, and use a competent installer if you are unsure about wiring or fitment.
Frequently asked questions
Is this the 12mm round-connector version?
Yes. This listing is for Push Control L, AUTOTERM assembly AT13-0002-AF0. The 6mm Molex Push Control S is a different product.
Will it control an AUTOTERM Air 2D or Air 4D?
Yes, AUTOTERM lists both current models as compatible. Confirm older heater versions separately before ordering.
Does temperature control work without an external sensor?
No. Air-heater temperature selections require a compatible external temperature sensor. Without one, the Push Control operates through power settings.
Can I use it with a Comfort Control panel?
Yes, the Duo module supports a second compatible control panel, but the separate Push Module Wire AT4-0014-AF0 (RV Supplies code RVZ8347) is required.
Is the complete controller waterproof?
No. The stainless push button is IP67 rated. The control module must remain in a dry, protected location.
Can Select Caravans deliver it in Auckland and across New Zealand?
Yes. Order online for delivery in Auckland, the Auckland Region and throughout New Zealand. Contact Select Caravans before ordering if you need help confirming the connector or heater compatibility.
