Product overview
Eternabond Double Sided Tape 1" x 50' Roll (15.2m) is an RV repair and maintenance product for compatible caravan, motorhome and trailer surfaces. Check material compatibility, preparation and application requirements before use.
Product details
EternaBond's new pressure activated MicroSealant Technology is a sealant so advanced it permanently bonds to virtually any roof type. It is ideal for repairing flashings, gutter, skylights, copings, ductwork, and more.
DoubleStick is pure EternaBond advanced MicroSealant with a removable siliconized release liner on each side. Designed to bond two surfaces, even two surfaces made of two or more dissimilar materials. Double- Stick creates a tight, permanent, waterproof seal. DoubleStick remains flexible to temperatures as low as -57°C making it virtually impossible to thermally shock the seal causing a leak.
DoubleStick Bonds to a wide range of surfaces including EPDM, TPO, most PVC, CSPE/ Hypalon, CPE , SBS, APP modifieds, asphalt BURs, coal tar BURs, tiles, shingle, coated and non-coated aluminum and metal roofs, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB board, shielding membranes, etc.
Basic Use:
DoubleStick tape is a self-sealing adhesive creating a water-tight, conformable seal between two or more irregular surfaces, and/or creates a weather proof, permanent bond between two or more similar or dissimilar surfaces. Use as a lap seal, under the foot of an equipment curb or skylight, or roll it into a bead or ball of MicroSealant to form a gasket, seal a hole or gap as needed.
DoubleStick tape is a self-sealing adhesive creating a water-tight, conformable seal between two or more irregular surfaces, and/or creates a weather proof, permanent bond between two or more similar or dissimilar surfaces. Use as a lap seal, under the foot of an equipment curb or skylight, or roll it into a bead or ball of MicroSealant to form a gasket, seal a hole or gap as needed.
Surface Preparation:
Surface must be clean and dry. Moisture, dust, dirt, or other foreign matter should be removed. Remove oil and grease, etc. with Eternaprime (RVO699) or a non residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.